Lansky Tri-Stone Benchstone

Om Lansky Tri-Stone Benchstone

Select the proper stone for your edge.Set the Tri-Stone Benchstone base on a stable, flat surface with the stone you have selected facing up. Note Lubrication of any kind is not recommended while sharpening on any of the three stones. DO NOT USE HONING OIL ON THE DIAMOND STONE.Observe the bevel angle on the blade you intend to sharpen. Then, bring the edge to the stone matching your sharpening angle to the bevel angle.Using light pressure, push the edge of the blade across the stone in one motion, much like trying to slice a thin layer off the top of the stone. Maintaining a consistent angle is essential for the best results.Repeat process 3-4 times on one side of the blade then switch to the other side and repeat.Repeat this process until edge is sharp then progress to finer stones and repeat.Clean your stones.Cleaning: Clean the Diamond stone with a damp rag after each use.Clean your Alumina Oxide stone with Nathan’s Honing Oil® after each useClean the Ceramic stone with the Lansky Eraser Block® after each use.SuggestionsUse a series of stones for the best results. For an undamaged edge start with the Medium Alumina-Oxide stone.Start with your selected stone. Use 3-4 strokes on one side of the blade. Repeat process on the other side of the blade. Repeat this whole process, switching between sides, about 3-4 times.Then use only 2 strokes per side. Repeat this process 2-3 times.Then 1 stroke per side. Repeat this process 1-2 times.Move on to a finer stone.Be Smart, Be Safe and Stay an Edge Above the Rest!

Merke:

Lansky Sharpeners

Kategori:

Knives & Tools > Sharpeners

Prisutvikling

Ofte stilte spørsmål